|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search this site...
|
 |
|
|
|
|
|
|
|
|
|
|
We are a proud member of NATE National Association
of Tower Erectors
|
|
| Home > Towers > Rohn G-Series Towers |
Rohn G-Series Towers
The G Series is a line of towers designed for efficiency, strength and versatility. The products in the G Series include the 20G, 25G, 45G, 55G, and 65G towers. These durable towers are entirely welded and fabricated with precision equipment and are suited to meet a variety of needs.
All towers in the G Series are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag® solid rod bracing to provide exceptional strength. All G Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish. |
|
 The 25G is available in the standard 10’ section length and a 7’ length which is UPS shippable. The 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, the 25G can rise to a maximum of 190 feet. Self supporting and bracketed heights depend on loading.
FEATURES:
- Completely Hot Dip Galvanized after fabrication
- Accessories for 20G are same as the 25G and completely interchangeable
- Built on 12 1/2” equilateral triangle design
- High strength tubular legs joined by Zig-Zag® cross members
- Each 10’ section contains all required nuts and bolts inside one leg
- Entirely welded and fabricated with precision equipment
- Extra heavy-duty 1 1/4” steel tubing side rails
- Continuous solid steel rod bracing
Go to 25G Page |
 The 45G is a true multi-use structure that provides excellent strength for applications up to 300 feet. It’s offered with either heavy steel tube or solid steel rod legs to satisfy a wide variety of needs under varied conditions. When properly installed, the standard tower will support loads as shown on various guyed and self-supporting information sheets.
FEATURES:
- Completely Hot Dip Galvanized after fabrication
- Heavy steel tube or solid steel rod side rails
- Built on 18” equilateral triangle design
- Utilizes 1 1/4” outside diameter, 14 gauge, special quality steel tubing or solid steel rod legs
- Zig-Zag® cross bracing is formed from a continuous 7/16” solid steel rod electrically welded every 15 3/4” on the side rails
- Each 10’ sleeve is joined to the other and double bolted for extra strength
Go to 45G Page |
|
 Because of its rugged design, the 55G lends itself to a wide variety of used in the communications field, particularly where unusual wind loading and height requirements exist. The 55G was designed to provide excellent strength in heights up to 400 feet. When properly installed, the standard tower will support loads as shown on various guyed and self-supporting information sheets.
FEATURES:
- Completely Hot Dip Galvanized after fabrication
- Heavy steel tube or solid steel rod side rails
- Built on 18” equilateral triangle design
- Utilizes high strength steel tubing side rails
- Zig-Zag® cross bracing is formed from a continuous 7/16” solid steel rod electrically welded every 15 3/4” on the side rails
- Each 10’ sleeve is joined to the other and double bolted for extra strength
- Adaptable to varying heights and loading requirements
Go to 55G Page |
 The 65G is designed to provide excellent rigidity and strength in applications up to 500 feet when guyed, and 80 feet when self-supporting. This high strength design covers a wide variety of communication uses. The 65G is completely prefabricated in welded sections allowing for quick and convenient installation.
FEATURES:
- Tower sections and all hardware are completely Hot Dip Galvanized after fabrication
- Utilizes 2” O.D. high strength steel side rails
- Built on 26 1/4” equilateral triangle design
- Utilizes high strength steel tubing side rails
- Zig-Zag® cross bracing is formed from a continuous 5/8” solid steel rod electrically welded every 22” on the side rails
- Completely prefabricated in welded sections
Go to 65G Page |
|
|
|
