The PA-2420-104 is a 2.4GHz AP/CPE/Bridge/Repeater. It is an aluminium case unit without antenna, range is up to 10km.
| Output Power | 20 dBm (100 mW) |
|---|
| Operating Mode | AP / Bridge (WDS) / Client / Repeater (Programmable) |
|---|
| Frequency Range | 2400-2483.5 MHz |
|---|
| Standard | IEEE802.11g / IEEE802.3 / IEEE802.3u |
|---|
| Power Source | AC 100 - 240 V / DC 48 V / 0.4 A |
|---|
| Operating Temperature | - 15°C to + 65°C |
|---|
| Signal Type | DSSS (RF) |
|---|
| Modulation | CCK, DQPSK, DBPSK, OFDM |
|---|
| Lightning Protection | In-built 3 arrestors, withstand 6 KV |
|---|
| Max Coverage | Up to 7 Km |
|---|
| Antenna Type | Panel, 12 dbi, 30° |
|---|
| Number of Channel | 14 |
|---|
| SDRAM | 8 MB |
|---|
| Flash | 2 MB |
|---|
| Data Rate | 54/48/36/24/18/12/6 Mbps auto fallback |
|---|
| Management Software | Web based GUI Interface, Web browser supported configuration & firmware upgrade, DHCP client |
|---|
| Sensitivity/Bandwidth | - 88 dBm: 11 Mbps, per < 8% / - 74 dBm: 54 Mbps, per < 10% |
|---|
| Distance/Bandwidth | 5 Mbps at 10 Km (802.11b) / 17 Mbps at 3 Km (802.11g) |
|---|
| Security | 64-bit/128-bit/152-bit encryption system Wi-Fi protected Access (WPA) |
|---|
