Antenna Systems & Solutions, Inc.
 antenna systems and solutions logoStore FrontAccountSearchProduct ListBasket Contents Checkout 
Sign In

Antenna's
Attenuators
Broadband Equipment
Cable Assemblies
Close Out Deals
Connectors
Elliptical Waveguide
EOD Tools
Pan and Tilt
Quickset Tripods & Pan & Tilt
Radio Accessories
Radio Equipment
RFW Series
Surge Arrestors
Tools
Towers & Accessories
Tower_Hardware
Waveguides
Coaxial Cable
Elliptical Waveguide Assemblies
IT Equipment
Industrial Batteries
Radio Repair
Radio Loggers
EOD Tools
Tripods

6 METER ANTENNA

 
Quantity in Basket: none
Code: 6M11JKV
Price:$1,479.40

Shipping Weight: 95.00 pounds
 
 
 
Quantity:
 
M2 Product Template
 

6M11JKV

M26M11JKV
SPECIFICATIONS
Model
6M11JKV
Frequency range 49.9-50.5 MHz
Usuable Frequency Range 49.6 TO 50.75 MHz
Gain over a Dipole 14 dBd
Front to back, Typical >21 dB
Beamwidth degrees E=28° / H=39°
FIRST SIDELOBE -18 dB
STACKING (HORIZ POL) 38' W, 36' H
Feed impedance
50 OHM
VSWR
1.2:1
Input Connector
'N' Female
Balun Half Wave 4:1, supplied
Power Handling
1500 WATTS
Element Type 3/4" Tube W 7/8" Center Sleeve
Boom length and diameter 69' / 2" / 2", 2-1/2" & 3" X 36" CNTR
Wind Area / Survival 10.7 SQ. FT. / 100 MPH
Weight / ShipWt.
83 LBS. / 95 LBS, Truck or air
FEATURES


This premier design Yagi was produced for Jim Treybig, W6JKV for use on his new 60 acre ranch outside Austin Texas. This rugged performer is unmatched in the industry and clearly is the king of the 6 meter band. The free space gain is 14 dBd and when horizon ground gain of 5+ dB is added in, moon echoes are not only possible but probable with power of 400 Watts or more. Structural features begin with the 3" x 1/8" wall 36 foot center section tapering down through 2-1/2" sections to 2" diameter tips. Rugged, machined clamps support 3/4" diameter elements and all elements are grounded to the boom. The driven element is also a 3/4" diameter tube for improved efficiency and bandwidth, fed by a 'T' match with adjustable shorting bars. Stainless screws lock the joints together. The "T" match block is CNC-machined and internal connections are sealed with a space-age silicone gel with dielectric strength nearly 4 times greater than air. All three connectors feature 'O' ring seals. The balun cable features double seals; one at the cable and a "seal nut" at the face of connector where it mates with the female. Dual overhead guy support lines maintain the clean lines and structural integrity.
Jimmy liked the antenna so much he has put up four more in a quad array in preparation for the fireworks of the new sun spot cycle. How about you" Are you ready for the new millennium" This very special antenna is made to order and sold only factory direct. We like to meet and speak directly with the new owners of this Yagi!
Every effort is made to insure the product specifications are complete and accurate. However, omissions, changes to product specifications and design changes may occur without notice. No returns on cable assemblies, cut to length items, opened items or tower hardware.
 
ICRA LOGO
Proud Member
of Afcea


Home | Antennas | Arrestors | Attenuators | Broadband | Cable Assemblies | Coaxial Cables & Connectors | Grounding | RF Detection & Jamming | Radios | Radio Loggers | Repeaters | Shelters | Trap & Trace | Tools | Towers | Tripod/Pan & Tilt | Waveguides

©Copyright 2009  Antenna Systems & Solutions, Inc. All Rights Reserved. All trademarks are properties of their respective owners. All prices are subject to change.